Just a reminder folks. The CARBURETOR PART NUMBER is REQUIRED on the website when you order parts. If it's a pair or jets or choke pull-off, bushing install kit, etc it's fine to just put 1234 in for the part number so you can check-out.
However, IF you are ordering a rebuild kit you MUST include the correct carburetor part number. It is located on the main casting drivers side. Very early carbs thru 1967 and even some early 1968 carbs may have a round tag staked in an embossed circle on the same side of the carb.
All others will have a stamped number in the location as shown in the pic below. In the rare case there is no tag and no stamped number it is best to call the shop and/or email pictures of the carb. I can take a look at the pictures and put together a rebuild kit for it......thanks.....Cliff
