I have just finished my first carb rebuild, an E4MC on my '85 Buick LeSabre, using Cliff's kit, book, and some great one-on-one counseling.
Once running, the car runs better than it ever has - no stubmling, no hesitation, no bogging - good news there!
The problem is getting it started.
When cold (sitting overnight) it takes a lot of cranking to get it started - maybe three "rounds" of 5-second cranking. The choke seems to be set properly (opens about 1/8" when cranking and first running, opens fully within a few minutes).
When warm (sitting for just a few minutes) it turns right over.
When warm (sitting for an hour or so) it takes a lot of cranking to start - far more than when it's cold. I can smell gas, so I think it's probably flooding, but no method of working the throttle makes a difference, including holding it wide open to unload it. The choke is fully open, so I don't think that's the issue. If I let it sit for a minute or two after the cranking marathon, it fires right up.
When I pulled the carb to do the rebuild, the bottom plugs didn't appear wet and there was no evidence of a fuel leak from the bowl, so I didn't test it or epoxy the plugs - maybe I should have just because.
Any thoughts as to what's going on and how to fix it would be appreciated!
Jim