« previous next »
Pages: [1]   Go Down

Author Topic: Power mods  (Read 2157 times)

Offline ShadowElky

  • Newbie
  • *
  • Posts: 2
Power mods
« on: November 03, 2012, 10:45:54 AM »
I've got a E4ME Qjet on a 305 in an El Camino. I have removed the choke plate and linkage, modified the secondary air valves to open completely, modified the secondary throttle plates to open completely, and removed the secondary choke pull-off linkage. It runs alot better thsan it used to, but as I am always looking for ways to get more power I am wondering if there is a way to gain power by changing the secondary metering rods. I am not opposed to any suggestions.
Logged

Offline Shark Racer

  • Jet Head
  • ****
  • Posts: 288
Re: Power mods
« Reply #1 on: November 03, 2012, 08:44:30 PM »
If the rods you have are excessively lean or rich, you can definitely gain power by adjusting them.
Logged

Offline ShadowElky

  • Newbie
  • *
  • Posts: 2
Re: Power mods
« Reply #2 on: November 06, 2012, 09:33:22 PM »
The current rods are DD rods, which upon receiving My Qjet book I have found are the leanest available. I also had a T hanger. So I ordered a set of DR rods and a B hanger to start.
Logged
Pages: [1]   Go Up
« previous next »