General Category > Quadrajet Carb Talk and Tips
carb advice please
kenn:
hello I'll try to keep this short.Do I rebuild or find a different one? I have 17086047. Eng is 350 +30, proformer intake, Alu 202 heads, 224/230/110 cam and 2"ram horns on my 72 C10. I have cliffs book and am still a little confused about the rebuild but what the heck. Thanks for the help Ken
Shark Racer:
Looks like a fine carb to me. For your cam you'll need to richen up the idle circuit a bit, and it'd probably be wise to re-calibrate it with some advise from cliff on jetting. I'm not sure if that's a single MAB or dual MAB carburetor.
kenn:
Thanks Shark. I am hoping to be directed on what parts to use as this is new to me. Also when I buy the kit does it come with directions or is the book good enough?
Shark Racer:
Cliff's kit will come with a few sheets of info on basic procedures. Get Cliff on the phone and he'll be able to give you good advice on parts.
kenn:
I took the carb apart and I dont know how the secondary holes come out ? It looks like one is out of round. Do you do it with a sckew and pull them out ?
Navigation
[0] Message Index
[#] Next page
Go to full version