Quadrajet Problem Solving > Diagnose a Quadrajet carburetor problem

extra piece after rebuilding quadrajet

<< < (2/2)

Ethan1:

--- Quote from: shanes77ta on September 14, 2013, 06:51:34 AM ---sorry for this response as it is very novice but this was the first carb i have opened up/rebuilt. i have always had someone else help with the carb stuff so... what is the air horn? also i always say im from missouri, show me... im not up on my terminology yet.

thank you for the help!

--- End quote ---

 Not a problem. The air horn is the top part of the carb, the float bowl is middle part of the carb and throttle body is the bottom part of the carb. So, you will have three main pieces when taken apart. The throttle position sensor or TPS, is located on the driver side front of the carb. Should be a white or black electrical plug sticking out, before you took it apart.

 Here is the part you need help on, that you don't know where it goes. I am not a 100% sure, but it is the only part I can think of it being.

 

Ethan1:
 You can see the plunger in the above photo. It is the one near the TPS lever, where you can see the green plunger sticking out alittle.

shanes77ta:
wow, awesome info! thanks for the help! now just to put it back in the car and see if it will run.

Navigation

[0] Message Index

[*] Previous page