Author Topic: 17054929  (Read 3514 times)

Offline caster

  • Newbie
  • *
  • Posts: 3
17054929
« on: January 29, 2014, 02:42:21 PM »
Can I get assistance identifying this carb body?  The 1 and the last 9 are struck a little deeper.

Offline Ethan1

  • Moderator
  • Qjet Hero
  • *****
  • Posts: 1148
Re: 17054929
« Reply #1 on: January 29, 2014, 03:13:24 PM »
Can I get assistance identifying this carb body?  The 1 and the last 9 are struck a little deeper.

 Carb 17054929 is a Service Replacement carb for '74 Chevrolet 350cid/400cid/454cid, M/T. It replaced carbs 7044226, 7044526 and 7044527. The date code is the 282nd day of 1980.
Ethan

1972 Chevelle

(oo______oo)

Offline caster

  • Newbie
  • *
  • Posts: 3
Re: 17054929
« Reply #2 on: January 29, 2014, 04:05:18 PM »
Thanks, what is a Service Replacement carb, through dealer channels?

Offline Shark Racer

  • Jet Head
  • ****
  • Posts: 288
Re: 17054929
« Reply #3 on: January 29, 2014, 04:22:55 PM »
Yup. Basically something you bought over the counter when your factory carb bit the dust for whatever reason.

Offline Ethan1

  • Moderator
  • Qjet Hero
  • *****
  • Posts: 1148
Re: 17054929
« Reply #4 on: January 29, 2014, 05:06:54 PM »
Thanks, what is a Service Replacement carb, through dealer channels?

 What Steve said above. :)
Ethan

1972 Chevelle

(oo______oo)

Offline caster

  • Newbie
  • *
  • Posts: 3
Re: 17054929
« Reply #5 on: February 01, 2014, 11:31:08 AM »
If a service replacement carb for a 1974 application was manufactured in 1980, would it have been made to use the pre-75
longer rods or the shorter later ones?  Can the earlier body run with the shorter rods and if so what would it not do correctly?

Offline Ethan1

  • Moderator
  • Qjet Hero
  • *****
  • Posts: 1148
Re: 17054929
« Reply #6 on: February 01, 2014, 02:28:39 PM »
If a service replacement carb for a 1974 application was manufactured in 1980, would it have been made to use the pre-75
longer rods or the shorter later ones?  Can the earlier body run with the shorter rods and if so what would it not do correctly?

 Should be pre-75 rods. Stock specs of that carb is .073" Primary Jets, 42B Primary Metering Rods, "K" Secondary Hanger and DL Secondary Metering Rods.
Ethan

1972 Chevelle

(oo______oo)

Offline Ethan1

  • Moderator
  • Qjet Hero
  • *****
  • Posts: 1148
Re: 17054929
« Reply #7 on: February 01, 2014, 03:58:20 PM »
 Excuse me, CH Secondary Metering Rods. Not DL.
Ethan

1972 Chevelle

(oo______oo)