Author Topic: Tip in Procedure question  (Read 2631 times)

Offline Mr.Pontiac

  • Qjet Hero
  • *****
  • Posts: 544
Tip in Procedure question
« on: November 06, 2009, 12:54:31 PM »
Tryed the tip in predure as per Cliff,s book on page 99, picks up about 100rpm as per stated in the book, but i am noticing that the carb. needs goosed to get idling to quiet down after do this. Is this normal??
My electric fuel pump was out of wack when this first happened, it was setting on 3 psi and after i set it at 6 psi still did it a little bit. Normal?? Better after the 6psi adj.