Hey bud, long time...I haven't done a carb in a while. I do again thank you for how well my boat carb turned out.
Now I am rebuilding a quadrajet for one of the techs at my work. It's from a 1981 Z28 with stock 350, believe the trans is standard, but I can ask if it matters.
I am going to need to do the primary throttle shaft bushings, a normal rebuild and a pair of idle tubes.
The carb # is 17059243 2018 CKD. I have it torn down, it's in good condition. I'd like it if you can supply me with rubberized vacuum port caps too, there are 3 or 4 of those along the front of the throttle plate.
What can you tell me?
Thanks, Peter
