Author Topic: Tech Calls to the Shop  (Read 1624 times)

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5418
Tech Calls to the Shop
« on: October 16, 2015, 05:43:27 AM »
Getting a LOT of free tech calls to the shop in recent months, and we just can NOT take that kind of call volume and get any work done.

Even worse, about 90 percent of the time the persons calling have bought cheap over the counter kits, or the junk they are pushing on Ebay and installed those parts, then asking us to crawl thru the phone and fix all the issues.

To top that off, when we recommend installing different or better parts, the same folks baulk on that deal and don't want to buy anything.

This is frustrating for both parties for sure.

First, we don't make any money to keep our doors open on these long/lengthy conversations.  I'd also add that keeping us on the phone hurts paying customers as we can't get their carburetors built or parts orders filled.

For this reason we are referring these callers either back to whom they bought the parts from, or to the website where they can post their questions and issues to get further assistance with them.

For those folks that are wanting to buy parts, or have bought parts and need assistance, let us know this when we take your call. If you get an answering machine leave a detailed message that you want to purchase parts, or need help with parts you have purchased, and your name will go to the top of the call back list......thanks....Cliff

Offline mark1

  • Garage guy
  • **
  • Posts: 12
Re: Tech Calls to the Shop
« Reply #1 on: October 27, 2015, 09:16:53 AM »
Good point!
1970 Hemi Superbee
1967 GTX
2007 Shelby GT 500
1977 AMC Gremlin X Levi
1968 Firebird 400

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5418
Re: Tech Calls to the Shop
« Reply #2 on: November 10, 2015, 03:44:22 AM »
Thanks.  So far it's working out pretty well.  Phone call volume is down some, and we're not getting nearly the "free tech" calls that we were getting.

A few still come in, and we quickly refer them to the website to put up their questions so everyone can help them out......Cliff