Author Topic: working on Olds 7043251 Main body air bleed question  (Read 1937 times)

Offline Mr.Pontiac

  • Qjet Hero
  • *****
  • Posts: 544
working on Olds 7043251 Main body air bleed question
« on: February 12, 2016, 03:34:13 PM »
I notied on this carb. the main body air bleeds are very small .038 and your book calls for .070. the jets in the carb. where .070,s and idle down are perfect at .046. So should i go ahead and open it up to .070????

Offline Mr.Pontiac

  • Qjet Hero
  • *****
  • Posts: 544
Re: working on Olds 7043251 Main body air bleed question
« Reply #1 on: February 12, 2016, 04:36:36 PM »
If it helps idle air bleeds are at .070 perfect accord. with your book.

Offline carmantx

  • Carb lover
  • ***
  • Posts: 182
  • Quadrajet Power.com
    • Quadrajet Power
Re: working on Olds 7043251 Main body air bleed question
« Reply #2 on: February 12, 2016, 09:10:48 PM »
The MAB's are typically small in the Olds quadrajets.  smaller DCR and larger idle tubes.
Are you building it for stock spec Olds or for something else?
'72 Buicks for fun and drag racing
quadrajetpower on facebook

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5435
Re: working on Olds 7043251 Main body air bleed question
« Reply #3 on: February 13, 2016, 05:47:28 AM »
I would leave them alone and stick close to the factory calibration for an Olds application.....Cliff