Hello everyone. I am a new member here, with a few novice questions. I have a 1984 chevy c-10 with a stock 305/th350c transmission that I just bought. The previous owner deleted all the emissions equipment, and installed a 17084226 q-jet. I am going to replace it because of a warped air horn. Replacing with an Edelbrock #1903. The old carb had 73 jets ,51m primary rods,and cp secondary rods with an E hanger. The float level is at 13/32 inch. I was wondering if these are the right parts for setting up a 305 ? Is the float level right? I have done a search, and have gotten 9/32, 11/32, and 13/32 inch float height . The Edelbrock will be rebuilt with a rebuild kit from cliffs, once I know what parts to order with it. THANKS
