« previous next »
Pages: [1]   Go Down

Author Topic: Choke conversion  (Read 1234 times)

Offline mcx

  • Carb lover
  • ***
  • Posts: 140
Choke conversion
« on: February 10, 2019, 05:59:50 AM »
Cliff...while searching EBay, I notice the early 70s Oldsmobile qjets have the hot air choke attachment, will this swap on my early 70s divorced type(Buickcaddychevy)collection??  I see there are easy conversions to convert the hot air to electric...Thx, Mike
Logged

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5432
Re: Choke conversion
« Reply #1 on: February 11, 2019, 04:48:51 AM »
Those convert easily to electric choke.

https://cliffshighperformance.com/Quadrajet-rebuild-kits-and-quadrajet-parts/electric-choke-and-pigtail-connector

This is our e-choke kit, comes with a USA made electric choke designed for the Q-jet so it clocks with the terminal down, so no air cleaner base interference.

Also has the connector for the wiring harness.....Cliff
Logged

Offline mcx

  • Carb lover
  • ***
  • Posts: 140
Re: Choke conversion
« Reply #2 on: February 11, 2019, 05:37:55 AM »
Cliff...if I swap the 1973 Olds hot air assembly over to my 1973 Buick/ect, can I keep the Buick dashpot and secondary link arm? Thx,Mike
Logged

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5432
Re: Choke conversion
« Reply #3 on: February 12, 2019, 03:05:21 AM »
That's not a bolt on conversion.  The main body will need to be drilled for the choke pull-off bracket.  There is not "boss" for the holes so it doesn't sit flat against the main casting.  I've seen a few done in that fashion but not overly fond of that conversion.......Cliff
Logged
Pages: [1]   Go Up
« previous next »