7041230

[mcx]

Thanks Cliff…I’ll plug the holes on the secondary side with lead or a small set screw.

[Kenth]

I would NOT plug those holes as they are a part of the design from factory.

FWIW

[mcx]

Kenth…thanks for your reply….I’m holding off on blocking the rear side now….could you explain how this shared passage way functions? I’m guessing it sprays out on the primary side as the air moves past on heavy accel and than transitions the spray over to the connected secondary side when the rear flaps open?

[Kenth]

The primary POE circuit on this unit consists of fuel pickup tubes and forward .050" discharge holes and equally sized rear air bleeds.

[mcx]

Thanks again Kenth…I have those  exact sizes in those  connected passages…I appreciate you providing the correct info.