Author Topic: 17059506  (Read 1472 times)

Offline R4lN

  • Garage guy
  • **
  • Posts: 12
17059506
« on: June 08, 2023, 05:15:44 AM »
Hi Cliff, I just ordered a rebuild kit from you for this carburetor.  Upon closer inspection I have noticed that its missing the vacuum canister and rod for the secondaries.  Do you mind taking a peek at these photos to make sure the rest of it is there and let me know what I need to order. Reference photo attatched. Thanks!

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5418
Re: 17059506
« Reply #1 on: June 09, 2023, 02:43:30 AM »
You are missing the pull-off and both links, plus the screws to attach it to the carb.

I have the pull-offs, screws and lower link, but currently the short link is out of stock.  I just went thru a huge pile of used parts and sold the last one I had couple of days ago......

Offline R4lN

  • Garage guy
  • **
  • Posts: 12
Re: 17059506
« Reply #2 on: June 09, 2023, 11:19:59 PM »
Ok, I will wait and bump this thread every so often to see if you have gotten the rods im missing.  Ty

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5418
Re: 17059506
« Reply #3 on: June 10, 2023, 05:10:43 AM »
I'm only out of the short one.  I may have a few in the back room on some old cores.  I'm doing a complete shop clean up and going thru everything over the next few weeks so may find a few of them.....

Offline R4lN

  • Garage guy
  • **
  • Posts: 12
Re: 17059506
« Reply #4 on: June 12, 2023, 01:54:58 PM »
Ok. Just keep me posted if you happen to come across one.  Thanks

Offline R4lN

  • Garage guy
  • **
  • Posts: 12
Re: 17059506
« Reply #5 on: July 22, 2023, 02:19:03 AM »
Hey Cliff just checking back to see if you ever came across the linkage that we were missing. Thanks in advance