Author Topic: Qjet Jetting for a 326  (Read 1554 times)

Offline Ponchojoe

  • Garage guy
  • **
  • Posts: 8
Qjet Jetting for a 326
« on: August 01, 2024, 12:44:49 PM »
Hi, been awhile since I’ve had a Pontiac but recently purchased a nice restored 67 LeMans with a 326, TH350 and 3.55 gears. It has a 1406 Eclone on it but it is flat in the secondary’s so I’m thinking of building my 17056261 carb and adding 68 intake.
About 6 years ago I built this carb using Cliffs book for a good running 462 with a 704 Lunati and ported 96s.
I am wondering what a good starting point is for this carb for the 326 which has maybe a one step up cam and 140 heads (9.2:1ish)
Thanks
Joe

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5418
Re: Qjet Jetting for a 326
« Reply #1 on: August 01, 2024, 11:35:41 PM »
How is the carburetor set up now, jets, metering rods,  idle system, etc?

Offline Ponchojoe

  • Garage guy
  • **
  • Posts: 8
Re: Qjet Jetting for a 326
« Reply #2 on: August 02, 2024, 05:11:32 AM »
I used your recipe number 2 I think, will pull it apart and report back
Thanks