General Category > Quadrajet Carb Talk and Tips
Q-jet on 496bbc
dualquad:
I am building a 496 bbc for my 69 chevelle. The motor should be approx. 600hp. I would like for it to appear to be a 396 350hp, so I plan on using a factory cast iron high rise intake with a Q-jet. My question is, what should I do for the fuel delivery system? Is anyone running a Q-jet on a 600hp street car? Looking for recommendations from those that have experience with a similar set up. Thank You.
lightning boy:
You're going to need an in tank pump with 8AN lines on a return style system with a regulator.
If you go this way you won't have any problems.
dualquad:
I had thought about adding a 1/2" supply line (which I believe is equivalent to 8AN) and using the factory 3/8" line for the return. Would that be ok? Or does the return need to be the same size as the supply? Also, any recommendations for a pump? Thanks
lightning boy:
IF it were me, I would get a new tank if they make one for your car. Most of the companies are going to have a pump to meet your Hp level. If not you'll have to cut and weld a sump in your tank and install a pump. A real Bosch 44 not a Chinese knock off, would be good, or a Denso unit from a mid 90's Toyota Supra would feed anything to 700HP. Yes IF your motor is really making 650HP you want a 8AN line back to the tank as well. Don't put any filter on the suction side of the pump. Just use the sock that comes with it, and mount the regulator return style after the carb.
77cruiser:
I have this in tank pump. https://www.summitracing.com/parts/avm-50-1000
This fuel pressure regulator. https://www.summitracing.com/parts/aei-13301
Navigation
[0] Message Index
[#] Next page
Go to full version