General Category > Quadrajet Carb Talk and Tips
Relocating the UIAB, are size adjustments required?
77cruiser:
I have a flip phone that sits on the counter.
Cadman-iac:
Here's the chart for the calibration options for the AFR gage I'm using. As i understand it, the default setting is the one that shows the AFR readings that we typically use.
If you see something I missed please let me know. Thanks, Rick
77cruiser:
I don't get that. I have an Autometer & a Innovate the Innovate just uses a free air check if it shows 21% O2 it's good.Can't remember what the deal was on the Autometer.
novadude:
I have a Daytona Sensors gauge and it just instructed me to use free air calibration. Not sure what that table means?
novadude:
Something else I just noticed. You are using the stock float setting of 13/32". I've typically used 9/32 or 10/32 on all the M4MC carbs I build. Have you tried experimenting with float height at all? Are you certain it is 13/32 and it didn't get knocked lower during calibration changes?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version