General Category > Quadrajet Carb Talk and Tips

Changing the choke pull-off from the rear to the front

<< < (2/3) > >>

quadrajam:
If you just want to test run that carb and don't have room for a rear pull-off
just don't run a rear pull-off...for now. Add a little extra air valve tension and
it will be good enough for what your testing. You will however need a front pull-off
for the choke. Any pull-off from about 76 up will bolt right on and does not matter
how much time delay. If you like the way it runs you can go ahead with the full
front-only conversion.

QJ

Cadman-iac:
 Yes, I used a later style pull-off and just swapped the shaft for one that used the front pull-off, then made a bracket for an adjustable stop.

quadrajam:
Excellent! Can we get a side view image as well ?

Cadman-iac:
You mean like this? I'll have to get more if this isn't what you want.

novadude:
Nice work!

Navigation

[0] Message Index

[#] Next page

[*] Previous page