« previous next »
Pages: [1]   Go Down

Author Topic: 800 cfm carb  (Read 2731 times)

Offline Paul

  • Carb lover
  • ***
  • Posts: 69
800 cfm carb
« on: January 19, 2011, 05:36:28 PM »
Cliff,  I am looking for a 800 cfm quadrajet carb to have your shop build/rebuild for my engine, what is the part number for my Pontiac 455 with an auto tranny I should be looking for? some sites say look for 1705xxxxxx but ive found those first 4 numbers can range in lots of carb specs.

Paul
Logged

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5435
Re: 800 cfm carb
« Reply #1 on: January 20, 2011, 04:38:21 AM »
Paul, what year, application, and HP rating is your 455 engine?.....Cliff
Logged

Offline Paul

  • Carb lover
  • ***
  • Posts: 69
Re: 800 cfm carb
« Reply #2 on: January 20, 2011, 06:48:25 AM »
Cliff,   The engine is a 74 455, with #13 cast iron heads, 72c.c. chambers, C.R. is around 12:1  im going to use a Comp cam XE-284, will be used for street/strip and running between 500 to 600 h.p. With a T.H.-400 tranny. intake is a edelbrock performer rpm.

Paul
Logged

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5435
Re: 800 cfm carb
« Reply #3 on: January 21, 2011, 02:47:45 AM »
Plenty of compression for some serious power!

I would put a tad more cam in it, something closer to 300-310 seat to seat timing, on a 112 LSA.

For the carburetor, any 1976 or later front inlet Pontiac, Buick, or Old's will make a great starting point for a really nice high performance carb.

My favorites are the Pontiac carbs with the large front vent, as found on 76-79 350's, 400's and 455's......Cliff
Logged

Offline Paul

  • Carb lover
  • ***
  • Posts: 69
Re: 800 cfm carb
« Reply #4 on: January 21, 2011, 11:54:54 AM »
Thank you. When I locate a carb I will get in touch.
Logged
Pages: [1]   Go Up
« previous next »