Author Topic: q jet 17059253 re purposed to boat carb...  (Read 2220 times)

Offline powell rat

  • Newbie
  • *
  • Posts: 1
q jet 17059253 re purposed to boat carb...
« on: May 25, 2011, 03:31:37 PM »
so i rebuilt this carband added .090 bypass air on both sides opened up the idle tubes to .036 idle  mixture screws 3.5 turns out. i did not open up the idle mixture holes to .090.i am experiencing nozzle drip. i am assuming that i probably should open up the idle mixture holes to the book prescribed .090 and tune from that point . do you think the carb has enough bypass air? thanks in advance for your reply     

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5435
Re: q jet 17059253 re purposed to boat carb...
« Reply #1 on: May 26, 2011, 07:15:39 AM »
Keep in mind the 79 Old's carb uses metric pitch threaded mixture screws, and tiny holes under them.

3.5 turns out isn't very far, most end up 5-6 turns out, and usually need slightly larger holes under them.....Cliff