« previous next »
Pages: [1]   Go Down

Author Topic: Idle Problems  (Read 2291 times)

Offline IA57BA

  • Newbie
  • *
  • Posts: 1
Idle Problems
« on: October 05, 2011, 07:30:21 PM »
I am trying to make a 7044213 carb work on a new GMPP 390hp 350. In order to make it idle I had to turn the idle adjustment screw in a long ways. In fact when I took the carb off I noticed that the throttle plate was above the fixed idle air bypass ports (vertical rectangular ports in front of barrel).

I assume this means the idle circuit is completely inoperative but when I opened up the carb I didn't see anything obviously broken or plugged. Is there a likely cause for this?
Thanks - JB
Logged

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5418
Re: Idle Problems
« Reply #1 on: October 16, 2011, 06:04:50 PM »
The carburetor is an emission calibrated unit, and too lean at idle for the application.  It needs more idle fuel to get it back on the idle system.  Do you have one of our books?.....Cliff
Logged
Pages: [1]   Go Up
« previous next »