Cliff's Quadrajet Parts and Rebuild Kits
Quadrajet Problem Solving => Dialing in your rebuilt Quadrajet carburetor => Topic started by: 1971GTO on February 03, 2010, 11:24:38 AM
-
Guys,
1. In an earlier thread it was discussed using a vacuum guage to dial-in the initial idle mixture settings. Which vacuum port is used to accomplish this please?
2. Also, locals say the vac. modulator line from the trans. goes to a lower port, but the configuration of the metal line only leads to an upper corner port. Is the local help mis-informed?
Got my Cliff's rebuild back few months ago. Gonna get that Edelbrock 750 off the 455HO right soon!
-
Guys,
1. In an earlier thread it was discussed using a vacuum guage to dial-in the initial idle mixture settings. Which vacuum port is used to accomplish this please?
Manifold vacuum; not ported (timed) vacuum.
2. Also, locals say the vac. modulator line from the trans. goes to a lower port, but the configuration of the metal line only leads to an upper corner port. Is the local help mis-informed?
Also manifold vacuum, not ported vacuum.