Author Topic: 17057262 Qjet  (Read 5115 times)

Offline Ozzmann

  • Garage guy
  • **
  • Posts: 20
17057262 Qjet
« on: October 02, 2012, 07:14:17 PM »
Is this a good carb to modify? Thinking about getting a latter model qjet and rebuilding to suit my 69 Goat. From what I've read in Cliff's book it should be a improvement over my older one.

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5435
Re: 17057262 Qjet
« Reply #1 on: October 04, 2012, 05:29:36 AM »
Excellent unit, about as good as it gets for a starting point for a really nice high performance Q-jet. 

I use a 17057274 on my 455, same carb as the 17057262.

Here's a shot of it in use:


http://www.youtube.com/watch?v=6zVdoLR-VzM&feature=plcp

Offline Ozzmann

  • Garage guy
  • **
  • Posts: 20
Re: 17057262 Qjet
« Reply #2 on: October 04, 2012, 06:20:56 PM »
Thanks Cliff, I'll fill out a quote request  via the website for a rebuild kit.
I guess I'm going to need jets and rods as well if this carb was originally for a late model 350 engine.
would I use close to the same specs on this carb , as I did on my 4988s?(on a 400 block 30 over)
jets------------------073"
prim.rods--------------41
idle channels---------.058"
idle tubes------------0385"
upper idle air bleeds---.051"
lower idle air bleeds---.070"
idle air bypass-------.096
mixture screws-------0.96
sec. rods -----------Cliff's
main body air bleed-------0.70
main air bleed air horn--------0.70
 idle bypass air void holes....... .140
It runs great , I just want to build another one! ;D
« Last Edit: October 04, 2012, 06:30:05 PM by Ozzmann »

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5435
Re: 17057262 Qjet
« Reply #3 on: October 05, 2012, 02:57:59 AM »
No, there is little to nothing the same between those units.  I'll hook you up with details via email when we send the parts out......Cliff

Offline beertracker

  • Carb lover
  • ***
  • Posts: 72
Re: 17057262 Qjet
« Reply #4 on: December 16, 2014, 10:35:25 AM »
Is 17057276 a 800CFM unit?  If so should it be identified with a bump in the bore casting?

Offline Ethan1

  • Moderator
  • Qjet Hero
  • *****
  • Posts: 1148
Re: 17057262 Qjet
« Reply #5 on: December 16, 2014, 02:37:27 PM »
Is 17057276 a 800CFM unit?  If so should it be identified with a bump in the bore casting?

 Can't find carb number 17057276 on the internet. Haven't checked in my manuals though. If you are instead, referring to carb number 17057262, then yes, it is an 800CFM version. I believe the bump should be in the primary bores. :)
Ethan

1972 Chevelle

(oo______oo)

Offline Ethan1

  • Moderator
  • Qjet Hero
  • *****
  • Posts: 1148
Re: 17057262 Qjet
« Reply #6 on: December 16, 2014, 02:41:14 PM »
Is 17057276 a 800CFM unit?  If so should it be identified with a bump in the bore casting?

 Or are you referring to carb 17057274? Best way to find out is check the primary bores for the bump.
Ethan

1972 Chevelle

(oo______oo)