carb advice please

[hunter55]

Good luck finding a replacement the correct size.  The only source I've ever found for them was quadrajetparts and theirs
Are about .010 larger than stock.  Ii wound up salvaging some from a donor carb.

[Shark Racer]

I have a parts carb that is near useless to me at this point. I'll gladly send it to you for the price of shipping. I think the discs are fine but can get pics. Let me know.

[kenn]

I just finished installing the secondary discs, they did go in pretty easy but I should have centered them before seating the retainer.

[kenn]

Hello   Sorry about the last post its in the wrong spot.  K.E.N.

[kenn]

How about that ,this post has two pages. I posted that I instaled the discs then couldn't find where it went . I used the search to find it and thought it was hunters post because that was at the top of the page. turns out that it was where it should be in the first place. I'm sorry about the confusion. I have to go now my finger is starting to bleed.

[Ethan1]

I used a 2inch 10-32 and a slide hammer and out they popped right out.
now to get my list of parts together.

 I will definitely have to try this method on my carb.

[kenn]

Hello, Well its together. I need to take it back apart to add bypass air. I didn't think it would need it but its good to see this stuff and learn as it happens.