General Category > For Sale / Wanted

Where would I find?

(1/3) > >>

PMD1969:
My odyssey to build one complete and working carb continues.  The last carb I have purchased has a good base plate BUT the PO removed the brass plug.

Where would I find one of these plugs on the cheap? 

Ethan1:

--- Quote from: PMD1969 on August 06, 2013, 07:20:26 AM ---My odyssey to build one complete and working carb continues.  The last carb I have purchased has a good base plate BUT the PO removed the brass plug.

Where would I find one of these plugs on the cheap?

--- End quote ---

 Can you post a photo of what you are talking about?

Ethan1:
 Also, you may try call Cliff's shop. He may have what you need. :D

429bbf:
1969, if your talking about the brass plugs in the bottom of the fuel bowl? cliff sells screw in plugs to fix the problem for good (if your carb is good enough to tap)i think it takes a fine thread 7/16 tap.hope this helps. whats the carb no.

PMD1969:
Sorry it took so long.  Pic is not my carb but the hole at the bottom is like mine and needs a replacement plug bolt whatever went there.



I appreciate you guys ticking with me.  I have yet to even start to rebuild a carb and I now own three.  I have wasted over $700 where I could have/should have bought the 68 Manual NOS for $500.  I am not even sure if I can cobble together one working carb from the two I have since I continue to find broken/missing pieces.

Navigation

[0] Message Index

[#] Next page