General Category > For Sale / Wanted

Where would I find?

<< < (2/3) > >>

Ethan1:

--- Quote from: PMD1969 on August 16, 2013, 05:24:20 PM ---Sorry it took so long.  Pic is not my carb but the hole at the bottom is like mine and needs a replacement plug bolt whatever went there.



I appreciate you guys ticking with me.  I have yet to even start to rebuild a carb and I now own three.  I have wasted over $700 where I could have/should have bought the 68 Manual NOS for $500.  I am not even sure if I can cobble together one working carb from the two I have since I continue to find broken/missing pieces.

--- End quote ---

 Are you referring to the brake booster vacuum port in the baseplate or the hot idle compensator just above that in the main body? Both parts are available and I am sure Cliff would have them.

PMD1969:
The BIG hole in the base plate.  My 69 MT Qjet has a brass plug there.  I have another 69 MT Qjet but the PO removed the plug for some reason?  The 68 AT Qjet I have has a open tube in the base plate that I would want to plug as well.  I am trying to create a "spare" carb that matches the OE 69 MT Qjet that is on the car.  The goal is to get the spare working (rebuilt) and then swap them so I can completely restore the OE carb.

PMD1969:
The plug in this picture is what I am after.

Ethan1:
 Here is one:

 

 http://quadrajetparts.com/rochester-quadrajet-parts-quadrajet-inlet-fittings-brass-pipe-plug-npt-p-538.html

 I am sure Cliff has them as well. 8)

429bbf:
you should be able to go to your local hardware store and ask for a brass 1/4 in pipe plug.

Navigation

[0] Message Index

[#] Next page

[*] Previous page