Plastic Part on 7037263

[jamesF]

... they work better anyhow......Cliff

This one worked well on the dyno where the carb you built and put it on made 470Hp with 670 heads...

This is purely a cosmetic thing. This one is not bad at all, just not as nice as the rest of the carb..

[jamesF]

James;
What's the part number on yours?

I believe I have one or two in my stash of small bits - I can see if I have one.

Unruhjonny it has 3223 stamped on it.

[Ethan1]

 If, Jon, doesn't have one, you just may have to go with Jon Hardgrove. Unless you don't mind waiting.

[Ethan1]

Unruhjonny it has 3223 stamped on it.

 That is not the correct one anyways. The one you want is part number ***3893.

[Ethan1]

That is not the correct one anyways. The one you want is part number ***3893.

 James,
 Contact Carb Junkys with photos of front and back and description of fast idle cam. I think they might have what you need. 

 info@carbjunkys.com

 770-457-8570

[Mr.Pontiac]

Something to think about, i am about 85% sure the the choke pull off bracket are differant on 67,s they have what i call teeth style with  if you want it 100% correct. I believe the one pictured is wrong!!